Intercooler

Airtec Ford Mondeo Mk3 2.0/2.2 Turbo Diesel Front Mount Intercooler

New

Ford Mk3 Mondeo 2.0, 2.2 TDCI Airtec Alloy Intercooler Upgrade

Comes supplied with full brackets and fittings included for easy direct fit.

More details

3 Items

£ 280.00

More info

Airtec Ford Mondeo Mk3 2.0/2.2 Turbo Diesel Front Mount Intercooler 

Airtec's latest creation is this intercooler for the Mondeo 2.0 and 2.2 Turbo diesels, they have now changed the total design with new high flow 60mm core and Angled flow end tanks, which in turn has increased power, torque and also lowered ATC Temps, Yes its really that good.

PROVEN PERFORMANCE!

BHP and Torque gains on Standard car fitted with Airtec Intercooler upgrade, Rolling road carried out at AMD.  (Gains. 5.2 bhp increase, with the torque rising by a massive 31.5 lb/ft! This figure will be easily doubled when fitted to a remapped Mondeo!)                                          


Test results from Street Performance's Modified Mondeo Diesel. 
Mods on car are :
-Free Flow exhaust and decat 
-Pipercross panelfilter
-Massive Airtec Intercooler upgrade
-Custom map up to 3.3k rpm 

Street Performance's Modified Mondeo made 208bhp and 441 lbft of torque! with the above mods.

Quotes by David at Street Performance 

"Figures are very good, even without map it does 173hp instead of 155hp! With mapping we saw the power rise up to 208hp!
We did limit the car's torque for more pull through revs and as smooth power curve as possible (but will be raised 10-20Nm after some more fiddling with the map! Along with 220+hp to make ST220/ ST225 owners jealous, with same or better performance with 40-50MPG!"
 
They also tested 2 cars to see what the Intake Air charge tempertures were under load, a complete standard car and Street Performance's modified Mondeo. Both cars tested with 8 degrees Ambient  Air temps.

Results -


Completely Standard car under load, the Intake tempertures kept rising! Up to 55-60° and above! 

Fully tuned car with the Airtec Intercooler fitted and the Intake temps never went higher than 15°! So the Airtec upgrade offers supreme cooling and gives much less stress on engine!

Reviews

Write a review

Airtec Ford Mondeo Mk3 2.0/2.2 Turbo Diesel Front Mount Intercooler

Airtec Ford Mondeo Mk3 2.0/2.2 Turbo Diesel Front Mount Intercooler

Ford Mk3 Mondeo 2.0, 2.2 TDCI Airtec Alloy Intercooler Upgrade

Comes supplied with full brackets and fittings included for easy direct fit.

Write a review

Accessories