Ford Mk1 Focus RS

Ford Zetec 1.6 16v Sigma H Beam PEC Steel Connecting Rods View larger

Ford Zetec 1.6 16v Sigma H Beam PEC Steel Connecting Rods

New

PEC Steel Connecting Rods - Ford Zetec 1.6 16v Sigma H Beam 

Specifiction

Part Number: G0110
Engine Type: 1.6 16v Zetec "Sigma" non VVT
Length C/C: 137.00mm
Small End Dia: 18.00mm
Small End Width: 18.00mm
Big End Dia: 47.00mm
Big End Width: 20.80mm

More details

10 Items

£ 636.94

More info

Ford Zetec 1.6 16v Sigma H Beam PEC Steel Connecting Rods

PEC rods are designed to withstand roughly 225hp per cylinder (typically 900hp on most 4cyl engines) and on the ARP 2000 series 3/8 bolts normally provided & have an 8,500 RPM safe operating limit (engine specific).

In some cases, we reccomend using the ARP custom age bolts available from us. This increases the hp threshold to 250hp per cylinder and raises the RPM limit to 9,000 however as every engine is different, these numbers are not guaranteed for every configuration.

Prolonged high RPM's for drifting, or sudden bursts of torque for drag racing (as two examples) will warrant the use of the custom age bolts to help retain the clamping force between the big end cap and the connecting rod.

PEC's own in house design facilities are able to create many different components but for nearly 10 years now, it's our connecting rods that have helped set us apart from the competition in terms of availability, ease of fitment and size of range. 

Manufactured from forgings originally produced in Sweden, PEC connecting rods have offered engine builders and tuners a cost efficient and yet high performing solution to a wide variety engine building problems.

H-Beam and I-Beam section connecting rods are forged from AISI 4340 (En24) steel. Heat treated to HRC 35-38 and then shot peened for a higher fatigue strength. Small ends are bushed for a fully floating pin and big ends are fitted with high quality ARP fasteners with different specification bolts available depending on the level of performance required.

PEC Connecting rods have been designed, manufactured and tested to the highest levels of scrutiny before being released to the trade and the public alike and their success record speaks for itself.

Reviews

Write a review

Ford Zetec 1.6 16v Sigma H Beam PEC Steel Connecting Rods

Ford Zetec 1.6 16v Sigma H Beam PEC Steel Connecting Rods

PEC Steel Connecting Rods - Ford Zetec 1.6 16v Sigma H Beam 

Specifiction

Part Number: G0110
Engine Type: 1.6 16v Zetec "Sigma" non VVT
Length C/C: 137.00mm
Small End Dia: 18.00mm
Small End Width: 18.00mm
Big End Dia: 47.00mm
Big End Width: 20.80mm

Write a review